×
  • Power Control Room
  • Living Quarter
  • Transportable Building
  • Power Control Room
  • Living Quarter
  • Electrical Distribution Control
  • Medium Voltage Switchgear
  • Medium Voltage Motor Control Center
  • Low Voltage Switchgear
  • Low Voltage Motor Control Center
  • Generator Control Panel
  • Distribution Board
  • Mobile Substation
  • Architecture
  • Structural
  • Electrical
  • Heating, Ventilation and Air Conditioning
  • Automatic Air Supression
  • Switchgear and Motor Control
  • Temperature rise and short circuit calculation for partially type tested assembly (PTTA)
  • Short Circuit Calculation
  • Temperature Rise Calculation
  • Enginereed to customize for every unique requirement
  • Connection to an existing line up : transition section
  • Transportable Control Room Project List
  • Electrical Distribution Panel Project List
  • Medium Voltage Motor Control Center

    Our medium voltage motor control center, MIM-Gard, is a partially type tested assembly (PTTA). Temperature rise and bus current withstand is designed and calculated based on IEC 60865 and IEC 60890. Available in NEMA/ANSI and IEC design. Isolating switch, fuse, vacuum contactor and electromechanical reduced voltage unit are from EATON. While soft starter and variable speed drive are from AUCOM. We provide roll out and fix type design

  • Assembly

    Frequency (Hz)50, 60
    Voltage rating (kV) 3.3, 5, 6.6, 7.2, 13.8
    Main bus ampere rating (A)1200, 2000
    Bus current withstand 1s (kA)50
    Starter interrupting current rating (kA)50
  • Main component

    Contactor continuos ampere rating (A)400, 800
    Contactor interupting rating (kA)4.5, 8.5, 13.2
    Isolating switch continuos ampere rating (A)400, 800
    Current limiting fuse ampere rating (A) 30 – 450
    Soft starter continuos ampere rating (A) 50 – 600
    VSD continuos ampere rating (A)50 – 1600